NOC 72410: Automotive service technicians, truck and bus mechanics and mechanical repairers
Automotive service technicians, truck and bus mechanics and mechanical repairers inspect, diagnose, repair and service mechanical, electrical and electronic systems and components of cars, buses, and light and commercial transport trucks. They are employed by motor vehicle dealers, garages, truck and trailer dealerships, fleet maintenance companies, and service stations, automotive specialty shops, transportation companies and retail establishments which have automotive service shops. This unit group also includes mechanical repairers who perform major repairs and replacement of mechanical units on newly assembled motor vehicles. They are employed by motor vehicle manufacturing companies. Apprentices are also included in this unit group.
Express Entry eligibility
- Skilled work (TEER 0 to 3): yes, TEER 2.
- Canadian Experience Class: counts as skilled Canadian work (1 year in the last 3 years).
- Federal Skilled Worker Program: counts as skilled work (1 year of continuous work in the last 10 years).
- Federal Skilled Trades Program: an eligible skilled trade (2 years in the last 5 years).
- High-wage occupation (from November 3, 2026): no. No high-wage add-on, and a job offer in it earns no CRS points.
TEER 2: Occupations that usually need a college diploma, an apprenticeship of 2 or more years, or supervisory duties. Every program has other requirements too, such as language test results and, for FSW, a points test.
Category-based draws
At least 12 months of full-time work (or the same amount part-time) in this occupation within the last 3 years, in Canada or abroad.
Category lists checked on canada.ca on 2026-10-17. IRCC category-based selection
CRS points for work in NOC 72410
Skilled Canadian work in this occupation earns the standard points, the same before and after November 3, 2026, with no high-wage add-on:
| Years in Canada | Single | With spouse |
|---|---|---|
| 1 | 40 | 35 |
| 2 | 53 | 46 |
| 3 | 64 | 56 |
| 4 | 72 | 63 |
| 5 or more | 80 | 70 |
See Canadian work points and the median-wage rule.
Main duties
This group performs some or all of the following duties:
- Automotive service technicians
- Review work orders and discuss work with supervisor
- Inspect motor in operation, road test motor vehicle, and test automotive systems and components using computerized diagnostic and other testing devices to diagnose and isolate faults
- Adjust, repair or replace parts and components of automotive systems including fuel system, brakes, steering and suspension, engine and drive train, emission control and exhaust, cooling and climate control, and electrical and electronic systems using hand tools and other specialized automotive repair equipment
- Test and adjust repaired systems to manufacturer's performance specifications
- Perform scheduled maintenance service, such as oil changes, lubrications and tune ups
- Advise customers on work performed, general vehicle condition and future repair requirements.
- Mechanical repairers - motor vehicle manufacturing
- Inspect and test mechanical units, such as engines, transmissions, axles and brake systems, to locate faults and malfunctions
- Diagnose faults or malfunctions and confirm findings with supervisor to determine whether to repair or replace unit
- Repair or replace mechanical units or components using hand and power tools
- Test and adjust units to specifications for proper performance
- Complete reports to record problems and work performed.
- Truck and transport and truck-trailer mechanics
- Adjust, repair or replace parts and components of commercial transport truck systems including chassis, frame, cab, body, engine and drive train, air brakes, steering, and fuel, hydraulic, electrical and electronic systems
- Adjust, repair or replace parts and components of truck-trailer systems including structural, brake and electrical systems.
- Workers in this unit group may specialize in the following areas: engine and fuel systems, transmission systems, air conditioning, cooling and heating systems, steering, alignment, brakes, drive lines, suspension, electrical and electronic systems, truck-trailer repair or diagnostic services.
For Express Entry your duties must match the lead statement and most of the main duties above.
Example job titles
- apprentice motor vehicle mechanic
- automobile mechanic
- automotive service technician
- brake systems mechanic
- bus mechanic
- mechanical upgrader - motor vehicle manufacturing
- motor repairer - motor vehicle manufacturing
- transmission mechanic
- truck and transport mechanic
- truck-trailer repairer
- tune-up specialist - motor vehicle
Employment requirements
- Automotive service technicians
- Completion of secondary school and training courses or a vocational program are usually required.
- Completion of a four-year automotive service technician apprenticeship program or A combination of over four years of work experience and industry courses in automotive technology is required to be eligible for trade certification.
- Trade certification for automotive service technicians is compulsory in Nova Scotia, Prince Edward Island, New Brunswick, Ontario and Alberta and available, but voluntary, in Newfoundland and Labrador, Quebec, Manitoba, Saskatchewan, British Columbia, the Yukon, the Northwest Territories and Nunavut.
- Automotive service technician (transmission) trade certification is compulsory in Ontario.
- Automotive service technician (steering, suspension and brakes) trade certification is compulsory in New Brunswick and Ontario.
- Automotive service technician (service station mechanic) trade certification is compulsory in Nova Scotia and available, but voluntary, in Prince Edward Island.
- Red Seal endorsement is also available to qualified automotive service technicians upon successful completion of the interprovincial Red Seal examination.
- Mechanical repairers, motor vehicle manufacturing
- Completion of secondary school and training courses or a vocational program are usually required.
- On-the-job training of two to three years is provided by employers.
- Truck and transport and truck-trailer mechanics
- Completion of secondary school and training courses or a vocational program are usually required.
- Completion of a four-year truck and transport mechanic or truck-trailer repair apprenticeship or A combination of over four years of work experience and industry courses in truck or heavy duty equipment mechanics is required to be eligible for trade certification.
- Trade certification for truck and transport mechanics is compulsory in Nova Scotia, Ontario and Alberta and available, but voluntary, in Newfoundland and Labrador, Prince Edward Island, New Brunswick, Quebec, Manitoba, Saskatchewan, British Columbia and the Yukon.
- Transport trailer technician trade certification is compulsory in Ontario and available, but voluntary, in Newfoundland and Labrador, Nova Scotia, Prince Edward Island, New Brunswick, Manitoba, British Columbia and the Yukon.
- Red Seal endorsement is also available to qualified truck-trailer repairers and truck and transport mechanics upon successful completion of the interprovincial Red Seal examination.
Similar jobs with a different code
- 72411Auto body collision, refinishing and glass technicians and damage repair estimators
- 72401Heavy-duty equipment mechanics
- 94200Motor vehicle assemblers, inspectors and testers
- 72020Motor vehicle mechanics supervisor
- 72423Recreation vehicle service technician
- 92020Supervisors, motor vehicle assembling
- 94204Truck trailer assembler
Common questions
- Is NOC 72410 eligible for Express Entry?
- Yes. As a TEER 2 occupation it counts as skilled work for the Canadian Experience Class, the Federal Skilled Worker Program and the Federal Skilled Trades Program.
- Is NOC 72410 a high-wage occupation?
- No. It is not on IRCC’s list of high-wage occupations for the November 3, 2026 rules. Only listed occupations add 20 to 70 points for Canadian work, or 50 to 100 points for a job offer.
- Which category draws include NOC 72410?
- It is on IRCC’s list for the Transport category, so you can also be invited in those category draws.
- What TEER is NOC 72410?
- TEER 2. The second digit of a NOC 2021 code is its TEER category.
High-wage occupations in technical trades and transportation officers and controllers
- 72010Contractors and supervisors, machining, metal forming, shaping and erecting trades and related occupations1.3×
- 72011Contractors and supervisors, electrical trades and telecommunications occupations1.5×
- 72012Contractors and supervisors, pipefitting trades1.5×
- 72013Contractors and supervisors, carpentry trades1.3×
- 72014Contractors and supervisors, other construction trades, installers, repairers and servicers1.3×
- 72020Contractors and supervisors, mechanic trades1.3×
More in technical trades and transportation officers and controllers
- 72010Contractors and supervisors, machining, metal forming, shaping and erecting trades and related occupations
- 72011Contractors and supervisors, electrical trades and telecommunications occupations
- 72012Contractors and supervisors, pipefitting trades
- 72013Contractors and supervisors, carpentry trades
- 72014Contractors and supervisors, other construction trades, installers, repairers and servicers
- 72020Contractors and supervisors, mechanic trades
- 72021Contractors and supervisors, heavy equipment operator crews
- 72022Supervisors, printing and related occupations
Find any NOC code · All high-wage occupations · Source: Statistics Canada, NOC 2021 Version 1.0
See your CRS score with NOC 72410
Quick CRS adds up every factor and shows your score under today’s rules and the rules from November 3, 2026, side by side. Free, about 3 minutes.